
Upgrade the firmware on the G700 Media Gateway
Issue 10.2 May 2007
611
Ensuring the MGP default gateway IP address is set
Communication Manager release 4.0 requires that the built-in VoIP module of the G700 Media
Gateway has a default gateway IP address. To ensure that this IP address is set, perform the
following steps:
1. At the
MG-???-1(configure)#
prompt, type
show ip route mgp.
The list of mgp routes appears.
2. Check that a Gateway IP address exists for Destination
0.0.0.0
.
3. If a Gateway IP address does not exist, type, at the
MG-???-1(configure)#
prompt,
set
ip route 0.0.0.0 0.0.0.0
<IP_address>
, where
<IP_address>
is the default
gateway IP address.
After you reboot the media gateway, the IP address is active and available.
Setting rapid spanning tree on the network
Spanning Tree (STP) is a loop avoidance protocol. If you don't have loops in your network, you
don't need STP. The "safe" option is always to leave STP enabled. Failure to do so on a network
with a loop (or a network where someone inadvertently plugs the wrong cable into the wrong
ports) will lead to a complete cessation of all traffic. Rapid Spanning Tree is a fast-converging
protocol, faster than the earlier STP, that
enables
new ports much faster (sub-second) than the
older protocol. Rapid Spanning Tree works with all Avaya equipment, and can be
recommended
.
Rapid Spanning Tree is set using the P330 stack processor command line interface.
To enable/disable spanning tree
1. Open a telnet session on the P330 stack processor, using the serial cable connected to the
Console port of the G700.
2. At the
P330-x(super)#
prompt, type
set spantree help
and press
Enter
to display the
set spantree commands selection.
3. To enable Spanning Tree, type
set spantree enable
and press
Enter
.
MG-001-1(super)# show ip route mgp
DESTINATION MASK GATEWAY INTERFACE (F/C/U)
--------------- --------------- --------------- ---------- -----------
0.0.0.0 0.0.0.0 135.9.80.254 motfec0 (3/0/165)
135.9.80.0 255.255.255.0 135.9.80.88 motfec0 (101/0/0)
MG-001-1(super)#
Содержание G700
