Avaya G700, Установка и обновление, Страница: 564 / 808

Manual upgrade of an S8300A and G700 to R4.0
564 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server
In this case, do the following:
1. Add a name for the standard announcements backup set, for example, us-eng-backup.
2. Copy the standard announcements from the standard set, for example us-eng, to the
backup set.
3. Copy the announcements of the custom announcement set into the announcement set with
the standard name.
Stopping IA770
To stop IA770:
1. Type
telnet 192.11.13.6
and press Enter .
2. Log in as craft or dadmin .
Note:
Note:
You must enter the commands in the next two steps using upper-case as
indicated.
3. Type
stop -s Audix
, and press Enter to shut down AUDIX. Note that the "A" in Audix
must be capitalized.
The shutdown takes a few minutes.
4. Type
watch /VM/bin/ss
, and press Enter to monitor the shutdown.
The watch command automatically refreshes every few seconds. When the shutdown is
complete, you see only the voicemail and audit processes. For example:
voicemail:(10)
audit http:(9)
Press Ctrl + C to break out of the
watch
command.
5. Type
/vs/bin/util/vs_status
, and press Enter to verify that AUDIX is shut down.
When AUDIX is shut down, you see the message
Voice System is Down
.
!
Important:
Important:
After upgrading an S8300 media server, you must upgrade the G700 or G350
media gateway firmware and media module firmware before restarting IA770.