Avaya G700, Установка и обновление, Страница: 699 / 808

Before going to the customer site
Issue 10.2 May 2007 699
2. At the SAT command line, enter add login.
The Login Administration screen appears.
3. In the Password of Login Making Change field, type your password.
4. In the Login’s Name field, type a login name agreed upon with the customer. Alternatively,
a Business Partner may add the dadmin login.
5. In the Login Type field, type customer .
6. In the Service Level field, type super-user .
7. In the Days to Disable After Inactivity field, type 90 .
8. In the Login’s Password field, type a password.
9. In Reenter Login’s Password field, type the password again.
10. In the Password Aging Cycle Length field, type 90, and press Enter .
11. If you are upgrading an LSP such that you created this super-user login on the primary
controller, do the following also on the primary controller.
a. Log in with
telnet
or
ssh
.
b. At the Linux command line, type
filesync -a <IP_address_of_LSP>
, where
<IP_address_of_LSP>
is the IP address of the LSP you are upgrading.
add login Page 1 of x
LOGIN ADMINISTRATION
Password of Login Making Change:
LOGIN BEING ADMINISTERED
Login’s Name:xxxxxxx
Login Type:
Service Level:
Disable Following a Security Violation?
Days to Disable After Inactivity:
Access to INADS Port?
LOGIN’S PASSWORD INFORMATION
Login’s Password:
Reenter Login’s Password:
Password Aging Cycle Length (Days):
LOGOFF NOTIFICATION
Facility Test Call Notification? Acknowledgment Required?
Remote Access Notification? Acknowledgment Required?
ACCESS SECURITY GATEWAY PARAMETERS
Access Security Gateway?