manualshive.com logo in svg

Avaya G700, Установка и обновление, Страница: 418 / 808

Поделиться
Скачать
Avaya G700 Скачать руководство пользователя страница 418

Manual installation of a new G700 with an S8300

418 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server

 

3. Select 

Install

 and press 

Enter

. 

The 

Select Release Version

 screen appears.

The Select Release Version screen

4. Select the appropriate release version (if more than one) then select 

OK

 and press 

Enter.

The 

Run AUDIX Installation

 screen appears.

Run AUDIX Installation screen

5. Select 

Yes

 if you want to install IA770 concurrently with Communication Manager. Select 

No

 if you do not. Then press 

Enter

.

Note:

Note:

If you do not install IA770 concurrently with Communication Manager at this time, 
and decide later to install it, you will have to upgrade Communication Manager 
again (even to the same release), For the upgrade, you use the Manage 
Software screen on the Maintenance Web interface, and select 

Yes

 at this screen 

for IA770 installation.

At this point, the following processes are initiated:

a. The S8300 hard drive and internal Compact Flash are partitioned and reformatted.

b. The Linux operating system is installed.

c. Once the drive is properly configured, the program begins installing Communication 

Manager software and reports the progress.

Содержание G700









































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов