Avaya G700 Скачать руководство пользователя страница 565 | Manualshive

Страница: 565 / 808

Avaya G700 Скачать руководство пользователя страница 565

Preparing for the upgrade to R4.0 on-site

Issue 10.2 May 2007

565

Backing up system files

For releases 1.2.0 through 1.3.9, this backup is optional but recommended in case there is a
need to back out of the upgrade.

!

CAUTION:

CAUTION:

If the current release of Communication Manager is 2.0.x, you

must

use this

procedure to back up system, security, and translations data (including AUDIX
data if IA770 is installed). For these releases, you will restore some or all of the
backup sets after the upgrade.

To perform a backup, you need an FTP address, directory path, and a user ID and password to
access an FTP server on the customer’s network. Check with your project manager or the
customer for this information.

To back up data

1. On the Maintenance Web Interface under Data Backup/Restore, click

Backup Now

.

The

Backup Now

screen displays.

Tip:

Tip:

Depending on the Communication Manager software version, the following
screen may look slightly different.

«
...
563
564
565
566
567
...
»

Содержание G700









































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов