Avaya G700, Установка и обновление, Страница: 228 / 808

Installing a new G700 without an S8300 using the Gateway Installation Wizard
228 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server
Assigning Node Names and IP Addresses for the C-LANs and LSPs
Note:
Note:
The CLAN boards must be TN799DP running version 5 or greater firmware. Be
sure to check the firmware version for these boards on the S8400, S8500, or
S8700-series Media Server. For information on how to upgrade the firmware,
please see "Upgrading firmware on programmable TN circuit packs," in
Upgrading, Migrating, and Converting Avaya Media Servers and Gateways ,
03-300412.
To assign node names and IP addresses
1. At the SAT prompt, type
change node-names ip
to open the Node Names screen.
Example Node Names Screen
2. Enter the name and IP address for the C-LANs and LSPs.
3. Press F3 ( Enter ) when complete.
change node-names ip Page 1 of 1
IP NODE NAMES
Name IP Address Name IP Address
default_________ 0__.0__.0__.0__ _______________ ___.___.___.___
node-1-clan __ 192.168.1 _.124 _______________ ___.___.___.___
node-2-clan 192.168.1 _.97_ _______________ ___.___.___.___
node-10-lsp 192.168.1 _.50_ _______________ ___.___.___.___
node-11-lsp 192.168.1 _.51_ _______________ ___.___.___.___
__________ ___.___.___. _ _______________ ___.___.___.___
__________ ___.___.___. _ _______________ ___.___.___.___
__________ ___.___.___. _ _______________ ___.___.___.___