Avaya G700, Установка и обновление, Страница: 559 / 808

Preparing for the upgrade to R4.0 on-site
Issue 10.2 May 2007 559
4. Enter
list signaling group
.
Note the signaling groups listed by number.
5. For each of the signaling groups listed, enter
status signaling group number
.
Make a note (write down) of any links that are down.
To record all busyouts
1. At the SAT prompt, type display errors and press Enter .
2. Look for type 18 errors and record (write down) any trunks that are busied out — you will
return them to their busy-out state after the upgrade.
To disable scheduled maintenance
Scheduled daily maintenance must not interfere with the upgrade.
1. At the SAT prompt, type
change system-parameters maintenance
and press Enter .
2. If scheduled maintenance is in progress, set the Stop Time field to 1 minute after the
current time.
or,
If scheduled maintenance is not in progress, set the Start Time field to a time after the
upgrade will be completed.
For example, if you start the upgrade at 8:00 P.M. and the upgrade takes 90 minutes, set
the
Start Time field to 21:30.
To check for translation corruption
1. At the SAT prompt, type
newterm
and press Enter .
2. Enter your terminal type and press Enter .
If you see the message,
Warning: Translation corruption found
follow the normal escalation procedure for translation corruption before continuing the
upgrade.
To save translations
1. At the SAT prompt, type
save translation
and press Enter .
2. Under Command Completion Status you should see
Success
.