Avaya G700, Установка и обновление, Страница: 498 / 808

Manual installation of a new G700 without an S8300
498 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server
Before going to the customer site
The procedures in this section should be completed before going to the customer site or before
starting a remote installation.
Getting information that the project manager provides
Ask the project manager for the information needed to prepare for this installation. Appendix
B: Information checklists provides several checklists to help you gather the installation and
upgrade information.
Setting Up the TFTP Server on Your Laptop or
on a Customer PC, if Necessary
A tar.gz file, which you obtain from a CD-ROM or a website, contains new G700 firmware. To
load the firmware on a G700 Media Gateway, you must place this tar.gz file on a TFTP server
that is connected to the customer’s LAN. The TFTP server can be a customer computer or it
can be your laptop if you have arranged with the customer to connect your laptop to the LAN.
Note:
Note:
A Linux or Unix TFTP server should be used only if the customer already has an
existing one. In these cases, you download the tar.gz file to your laptop and give
it to the customer for proper placement and execution.
To obtain the TFTP server software and install it, see Appendix D: Install the Avaya TFTP
server .
Downloading G700 firmware files to your TFTP directory
To install new firmware for the G700 processors and the media modules, you first need to move
the new firmware files to a directory on the TFTP server. The installation program reads the new
firmware files from this directory on the TFTP server.
Perform one of the two procedures in this section, depending on whether you have a bundled
tar.gz file on a CD or wish to download individual firmware files from the Avaya Support website.