manualshive.com logo in svg

Avaya G700, Установка и обновление, Страница: 486 / 808

Поделиться
Скачать
Avaya G700 Скачать руководство пользователя страница 486

Manual installation of a new G700 with an S8300

486 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server

 

Configuring the primary server to report alarms to a services 
support agency

The primary server may be an S8300, S8400, S8500, or S8700/S8710/S8720 Media Server. 
The media server supports two methods for reporting alarms. Either, both, or no alarm-reporting 
method may be used at a given site.

●

OSS Method. 

The server's software applications and hardware devices under its control can generate 
Operations Support System (OSS) alarms. These alarms are recorded in the server logs, 
and may be reported to Avaya's Initialization and Administration System (INADS), or 
another services support agency over the server's modem interface.

To provide OSS alarm notification, the server requires a USB connection to a modem that is 
connected to an analog line. The modem must be configured using the media server’s Web 
Interface, in the 

Set Modem Interface

 screen, and enabled to send and receive calls using 

the 

Enable/Disable Modem

 screen. 

Note:

Note:

Configuration of the OSS alarming method can only be done using Linux shell 
commands.

●

 SNMP Method

SNMP traps may be sent in User Datagram Protocol (UDP) to a corporate network 
management system (NMS) using the 

Configure Trap Destinations

 screen on the media 

server’s Web Interface. The OSS and SNMP alarm-notification methods operate 
independently of each other; either or both may be used. Currently, the following NMSs are 
supported:

- Avaya Fault and Performance Manager, as a standalone application, or integrated within 

Avaya Network Management Console with VoIP SystemView

- Avaya Network Management Console with VoIP SystemView

- HP Openview

To provide SNMP alarm notification, on the server Web Interface use the 

Configure Trap 

Destinations

 screen to set up SNMP destinations in the corporate NMS.

Administering INADS phone numbers and Enabling alarms to INADS

The following procedure, using the primary server’s Linux shell commands, administers the 
dial-out modem to send alarms in the OSS method. In this example, the primary server is an 
S8300, and the services support agency is Avaya’s Initialization and Administration System 
(INADS).

Perform this task after all Communication Manager administration is complete.

Содержание G700









































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов