Avaya G700 Скачать руководство пользователя страница 189

Страница: 189 / 808

Administering an S8400, S8500, or S8700-series primary controller

Issue 10.2 May 2007

189

Figure 18: Add Local Survivable Processor screen

2. The type field is automatically populated with

LSP

appears in the field if the node

name is

not

associated with ESS.

3. Enter a network region for the LSP. The default is

. However, there may be a different

network region better suited for the LSP to provide media gateway and IP phone support.

Administering the Media Gateway

To perform the procedures in this section, to the primary controller, log in, and open a SAT
session.

CAUTION:

CAUTION:

Before administering a media gateway, make sure that the gateway has been
fully configured.

In this section, you will do the procedures:

●

To add a media gateway

●

To verify changes

●

To enable announcements, if necessary

To add a media gateway

1. At the SAT prompt, type

add media-gateway

<number>

where

<number>

is the gateway number from 1 to

. (

is 50 for an S8300, 5 for an S8400,

and 250 for an S8500 or S8700-series Media Server).

The S8300 displays the

Media Gateway

screen.

add survivable-processor sv-mg2-lsp

Page 1 of xx

SURVIVABLE PROCESSOR - PROCESSOR ETHERNET

Node Name: sv-mg2-lsp

IP Address: 128.256.173.101

Type: LSP

Network Region: 1

Содержание G700









































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание G700

Отзывы:

Avaya G700, Установка и обновление, Страница: 189 / 808

Результаты поиска

Содержание G700

Отзывы: