Avaya G700 Скачать руководство пользователя страница 125

Страница: 125 / 808

Install the S8300

Issue 10.2 May 2007

125

4. Type

display

and press

Enter

to confirm that

Sending only CR

is set.

5. Close the window by clicking on the

in the upper-right corner.

This resets your Microsoft telnet defaults and does not need to be done each time you use
Telnet.

Remastering the hard drive and installing the software

To do before you start the upgrade

1. Verify that the S8300 is inserted in slot V1.

2. Verify good AC power connections to the G700.

3. Avaya recommends using a UPS backup for media servers.

If a UPS is present, make sure the G700 is plugged into the UPS.

4. Verify that all Ethernet connections are secure, to ensure the file transfer process is not

interrupted.

To begin the upgrade

1. Click

Start > Run

to open the

Run

dialog box.

2. Type

telnet 192.11.13.6

and press

Enter

The first RP screen

Tip:

Tip:

To navigate on these screens, use the arrow keys to move to an option, then
press the space bar to select the option. Press

Enter

to submit the screen.

Содержание G700









































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание G700

Отзывы:

Avaya G700, Установка и обновление, Страница: 125 / 808

Результаты поиска

Содержание G700

Отзывы: