Avaya G700, Установка и обновление, Страница: 180 / 808

Installing a new G700 with an S8300 using the Avaya Installation Wizard
180 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server
In this section, you will use the SAT interface on the primary controller to:
●
Assigning Node Names and IP Addresses for the C-LANs and LSPs
●
Administering Network Regions
●
Assigning LSPs to the Network Regions
●
Administering IP Interfaces
●
Identifying the Survivable Processor on the primary controller
Note:
Note:
For information on installing the CLAN boards on the S8400, S8500, or
S8700-series port networks and complete information on installing an S8400,
S8500, or S8700-series Media Server, see the Installation documentation on the
Documentation for Avaya Communication Manager, Media Gateways and
Servers CD
, 03-300151.
Assigning Node Names and IP Addresses for the C-LANs and
LSPs
Note:
Note:
The CLAN boards must be TN799DP running version 5 or greater firmware. Be
sure to check the firmware version for these boards on the media server. For
information on how to upgrade the firmware on the S8400, S8500 or
S8700-series Media Server, please see the "Upgrading firmware on
programmable TN circuit packs," in
Upgrading, Migrating, and Converting Avaya
Media Servers and Gateways , 03-300412.
To assign node names and IP addresses
1. At the SAT prompt, type
change node-names ip
to open the Node Names screen.
Example Node Names Screen
change node-names ip Page 1 of 1
IP NODE NAMES
Name IP Address Name IP Address
default_________ 0__.0__.0__.0__ _______________ ___.___.___.___
node-1-clan __ 192.168.1 _.124 _______________ ___.___.___.___
node-2-clan 192.168.1 _.97_ _______________ ___.___.___.___
node-10-lsp 192.168.1 _.50_ _______________ ___.___.___.___
node-11-lsp 192.168.1 _.51_ _______________ ___.___.___.___
__________ ___.___.___. _ _______________ ___.___.___.___
__________ ___.___.___. _ _______________ ___.___.___.___
__________ ___.___.___. _ _______________ ___.___.___.___