CPS100 SERIES OPERATION MANUAL
SECTION 6:
Entire Contents Copyright
2018 by Adaptive Power Systems, Inc. (APS) • All Rights Reserved • No reproduction without written authorization from APS.
APS CPS100 Series Power Source Operation Manual
Page 87 of 231
RS485 Settings
From the Remote Control screen, press the
RS485
soft key to change RS485 interface
settings. Scroll through Baud rate, parity, Stop bits and Address fields and use the shuttle to
set the desired values. Press the [Esc] key when done to back up to the Remote Control
screen.
Parameter ranges are:
•
Baud Rate:
9600, 19200, 38400, 57600, 115200
•
Parity Type:
None, Even, Odd
•
Stop Bits:
1, 2
•
485 Addr:
1 ~ 254
GPIB Settings (Option)
From the Remote Control screen, press the
GPIB
soft key to change GPIB interface settings.
Scroll to the “GPIB Addr” field and use the shuttle to set the desired address. Press the [Esc]
key when done to back up to the Remote Control screen.
Parameter ranges are:
•
GPIB Addr:
1 ~ 30
