CPS100 SERIES OPERATION MANUAL
SECTION 6:
Entire Contents Copyright
2018 by Adaptive Power Systems, Inc. (APS) • All Rights Reserved • No reproduction without written authorization from APS.
APS CPS100 Series Power Source Operation Manual
Page 107 of 231
To create a new waveform, use the touch
screen to press any of the harmonics
numbers you want to edit. Set amplitude and
phase angle of any of the harmonics you
want to include.
Press the
Waveform Preview
soft key for a
visual representation of the resulting wave
shape.
The preview of the wave shape will appear in
the center of the LCD screen.
If you are satisfied with the result, use the
Save soft key to save the new waveform to
non-volatile memory.
Note:
If the waveform is not saved, it will
be lost when the power source is
turned off.
Once created and saved, the synthesized
waveform can be applied at the output of
the power source. To do so, press the [Esc]
key to back up to the previous Synthesis
screen.
Press the
Trigger
soft key to load the
waveform to the output register. Once
pressed, this softkey changes to
Stop
.
The waveform will start at the start phase
angle set for the synthesized waveform.
See next page.
