CPS100 SERIES OPERATION MANUAL
SECTION 6:
Entire Contents Copyright
2018 by Adaptive Power Systems, Inc. (APS) • All Rights Reserved • No reproduction without written authorization from APS.
APS CPS100 Series Power Source Operation Manual
Page 119 of 231
Running an IEC 4-11 Variations test
To execute the IEC 4-11 test, press the [Esc]
key to exit the Edit mode and return to the
main IEC 4-11 test screen.
Start the test by pressing the
Trigger
soft
key. Once pressed, it changes to
Stop
.
The test will now run until completed. Total
test time is a function of the count, interval,
td, ti and ds.
At the completion of the entire sequence,
the
Stop
soft key will revert to
Trigger
. To
abort a test in progress, press the
Stop
soft
key during a test run.
