manualshive.com logo in svg

APRILIA TUAREG 660, Руководство по обслуживанию станции

Поделиться
Скачать
APRILIA TUAREG 660 Скачать руководство пользователя страница 249

To remove the front brake pads proceed as de-

scribed:

•

Remove the cotter pin (1) from the pin.

•

Remove the pin (2).

•

Remove the two brake pads (3).

DO NOT OPERATE THE BRAKE LEVER ONCE THE BRAKE
PADS HAVE BEEN REMOVED, AS THIS MAY FORCE THE
PISTONS OUT FROM THEIR SEATS AND ALLOW BRAKE
FLUID TO ESCAPE.

Installing

THIS VEHICLE IS FITTED WITH A DOUBLE DISC FRONT BRAKING SYSTEM (RIGHT AND LEFT
SIDE).
ALWAYS REPLACE ALL THE PADS FROM BOTH FRONT BRAKE CALLIPERS.
REPLACING THE PADS OF ONLY ONE FRONT CALLIPER MAY JEOPARDISE THE VEHICLE
STABILITY AND SAFETY, POSING SERIOUS DANGER FOR PEOPLE, OBJECTS AND THE VE-
HICLE ITSELF.

CAUTION

THE FOLLOWING OPERATIONS REFER TO A SINGLE CALLIPER, BUT APPLY TO BOTH.

TUAREG 660

Braking system

BRAK SYS - 249

Содержание TUAREG 660
























































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды