Adaptec 2254100-R - SATA RAID 2410SA SGL/64 Controller, Руководство по программному обеспечению, Страница: 99 / 233

5-60
container Commands
with the
container readonly
and
container readwrite
commands.
Some CLI commands cause an array to temporarily become read-
only without the use of the
container readonly
command.
The Lk Column
This column displays the letter
L
if the array is locked. Otherwise, if
the array is not locked, the column displays a blank space. You can
explicitly lock and unlock an array with the
container lock
and
container unlock
commands.
Some CLI commands (during their execution) cause the array to
become locked. Typically these commands unlock the array upon
completing execution.
The Task Column
This column displays the task or tasks running on a specified array
or SCSI disk. Specifically, the column can display the items listed in
Table 5-4.
Table 5-4. Task Types
Task Meaning
Create
A create mirror set or create multilevel mirror set task
is running on the specified array. When the create
mirror set or create multilevel mirror set task
completes, the specified array is a mirror set or a
multilevel array of mirror sets. The create a mirror set
or create a multilevel mirror set task runs as a result of
using the
container create mirror or
container create mmirror
command.
FmtFAT
An array format FAT file system task is running on the
specified array. The format FAT file system task runs as
a result of using the
container format
command
with the
/file_system
switch set to
FAT
.
FmtNTFS
An array format NTFS file system task is running on
the specified array. The format NTFS file system task
runs as a result of using the
container format
command with the
/file_system
switch set to
NTFS .