Adaptec 2254100-R - SATA RAID 2410SA SGL/64 Controller, Руководство по программному обеспечению, Страница: 90 / 233

5-51
container Commands
Examples
Before extending a volume set, use the
container list
command to obtain information about any existing arrays. As the
following example shows, there is an array (volume set) 1 on this
controller:
AAC0>container list
Executing: container list
Num Total Oth Stripe Scsi Partition
Dr Label Type Size Ctr Size Usage C:ID:L Offset:Size
-- ----- ------ ------ --- ------ ------- ------ -------------
E: 1 Volume 100MB NTFS 2:02:0 200MB: 100MB
Before extending the volume set, you might want to use the
disk
show space
command to display space usage information on the
devices from which you plan to add freespace. The following
example extends a volume set by adding freespace from two
devices:
AAC0>container extend volume 1 ((2,0,0), 32M) ((2,1,0),
32M)
Executing: container extend volume 1
((CHANNEL=2,ID=0,LUN=0),33,554,432)((CHANNEL=2,ID=1,LUN
=0),33,554,432)
container 1 expanded.
As the command executes, note that the title bar of the DOS window
displays the status of the command. For example:
Stat:OK!,Task:101,Func:FSX Ctr:0,State:RUN 83.8%
See page 3-10 for detailed information on the status information that
the command displays in the title bar as it executes the task.