Adaptec 2254100-R - SATA RAID 2410SA SGL/64 Controller, Руководство по программному обеспечению, Страница: 51 / 233

5-12
container Commands
Dr Label Type Size Ctr Size Usage C:ID:L Offset:Size
-- ----- ------ ------ --- ------ ------- ------ -------------
F: 0 Volume 30M NTFS
63 Mirror 15MB 0:02:0 64.0KB: 15.0MB
0:04:0 64.0KB: 15.0MB
62 Mirror 15MB 0:03:0 64.0KB: 15.0MB
0:05:0 64.0KB: 15.0MB
The following list describes the change to the display as the result of
creating a multilevel array of mirror sets with the
container
create mmirror
command:
■ The Dr column is blank to indicate that the newly created
mirror sets (63 and 62) do not have a drive letter assigned to
them.
■ The Type column displays Mirror for arrays 63 and 62 to
indicate that the underlying arrays are mirror sets.
■ The State column displays the state of the arrays, which in this
example are all in the Normal state.
Note that this column appears only if you specify the
/full
switch with the
container list
command.
■ The Scsi C:ID:L column displays the SCSI device ID for the
disk(s) on which the underlying mirror set(s) reside. In the
example, mirror set 63 resides on disk 0:02:0 and 0:04:0. Mirror
set 62 resides on disk 0:03:0 and 0:05:0.
■ The Partition Offset:Size column displays the partition
offset(s) and size(s) for the underlying mirror set(s). In the
example mirror set 63 and 62 have partition offsets of 64.0 KB
and sizes of 15.0 MB.
If a partition is dead, the “:” (colon) in the Partition Offset:Size
column changes to a “!” (exclamation point). See the
disk
remove dead_partitions ( page 7-9 )
command for
more information on dead partitions.
Related Information
container
commands:
■
container create mirror
( page 5-5 )
■
container list
( page 5-54 )
■
container promote
( page 5-69 )