Adaptec 2254100-R - SATA RAID 2410SA SGL/64 Controller, Руководство по программному обеспечению, Страница: 144 / 233

5-105
container Commands
Examples
Before setting the I/O delay on an array, use the
container list
command to obtain information about any existing arrays.
As the following example shows, there is an array 0 (a volume set)
on this controller:
AAC0>container list
Executing: container list
Num Total Oth Stripe Scsi Partition
Dr Label Type Size Ctr Size Usage C:ID:L Offset:Size
-- ----- ------ ------ --- ------ ------- ------ -------------
F: 0 Volume 10.0MB NTFS 0:02:0 64.0KB: 10.0MB
The following example creates a mirror set asynchronously and sets
an I/O delay of 20 milliseconds for array 0. You need to perform the
create mirror task asynchronously. Otherwise, you cannot change
the I/O delay:
container create mirror /io_delay=20 0 (0,2,0)
Executing container create mirror /io_delay=20 0 (CHANNEL=0,ID=2,LUN=0)
The following example shows how to change the I/O delay to 40
milliseconds on the currently running create mirror task:
AAC0>container set io_delay 0 40
Executing: container set io_delay 0 40
Use the
container list
command after using the
container
set io_delay
command to display information about the array,
as in the following example:
AAC0>container list
Executing: container list
Num Total Oth Stripe Scsi Partition
Dr Label Type Size Ctr Size Usage C:ID:L Offset:Size
-- ----- ------ ------ --- ------ ------- ------ -------------
F: 0 Volume 10.0MB NTFS 0:02:0 64.0KB: 10.0MB
As the example shows, there is no difference between the array list
display prior to and after the set I/O delay operation.