Adaptec 2254100-R - SATA RAID 2410SA SGL/64 Controller, Руководство по программному обеспечению, Страница: 123 / 233

5-84
container Commands
container remove drive_letter
To remove a drive letter, use the
container remove
drive_letter
command. To use the
container remove
drive_letter
command, none of the array’s files can be open.
Command Availability
This command and its associated switches (if any) are supported on
the following operating systems:
■ Windows NT
■ Windows 2000 (basic disk only)
■ Windows XP (basic disk only)
Syntax
container remove drive_letter {string}
Parameters
{string}
Specifies the drive letter to remove. The colon (:) after the drive
letter is optional.
Examples
Before removing a drive letter from an array, use the
container
list
command to obtain information about any existing arrays. As
the following example shows, there is an array 0 (a volume set) on
this controller with a drive letter
F
:
AAC0>container list
Executing: container list
Num Total Oth Stripe Scsi Partition
Dr Label Type Size Ctr Size Usage C:ID:L Offset:Size
-- ----- ------ ------ --- ------ ------- ------ -------------
F: 0 Volume 10.0MB NTFS 0:02:0 64.0KB: 10.0MB
The following example removes drive letter
F
from array 0:
AAC0> container remove drive_letter F
Executing: container remove drive_letter “F”