Adaptec 2254100-R - SATA RAID 2410SA SGL/64 Controller, Руководство по программному обеспечению, Страница: 146 / 233

5-107
container Commands
container set label
To assign a new label to the specified array or to assign a label to an
array that has no label, use the
container set label
command.
The following commands have a
/label
switch that allows you to
assign a label to the array when you create it:
■
container create mstripe
(a multilevel stripe set)
■
container create mvolume
(a multilevel volume set)
■
container create raid5
(a RAID-5 set)
■
container create stripe
(a stripe set)
■
container create volume
(a volume set)
The label you specify with the
container set label
command
and the
/label
switch associated with the previously listed
container create
commands is not the label that displays in
Windows Explorer. The label displayed by Windows Explorer comes
from the label specified with the
container format
command.
Syntax
container set label {container} {string}
Parameters
{container}
Specifies the ID number (0 to 63) of the array to which you
want to assign a label.
{string}
Specifies the label you want to assign to the array. The label is a
string of up to sixteen characters.
Examples
Before assigning a label to a specific array, use the
container
list
command to obtain information about any existing arrays.
As the following example shows, there is an array 0 (a volume set)
on this controller with no label assigned to it (as evidenced by no
label in the
Num Label
column):
AAC0>container list