Adaptec 2254100-R - SATA RAID 2410SA SGL/64 Controller, Руководство по программному обеспечению, Страница: 219 / 233

9-2
task Commands
task list
To display a list of one or all tasks running on the currently opened
controller, use the
task list
command. A task is an operation that
occurs only on the controller, asynchronous to all other operations.
Clearing a disk, creating a file system, and creating a mirror set are
examples of tasks done on the controller.
The command displays an appropriate message if there are no tasks
running on the controller.
Syntax
task list [/all{=boolean}]
Parameters
{integer}
Specifies the task ID for the task whose information you want
to display. You need to perform a
task list /all
to display
all tasks and their associated IDs.
Switches
/all{=boolean}
Specifies whether to display all currently running tasks. If you
set this switch to
TRUE
, the command displays a list of all tasks
running on the currently opened controller.
This switch defaults to
FALSE
if you specify the
integer
parameter; otherwise, the switch defaults to
TRUE
.
Examples
The following example shows typical output as a result of using the
task list
command.
AAC0> task list
Executing: task list
Controller Tasks
TaskId Function Done% Array State Specific1 Specific2
------ -------- ------ --------- ----- --------- --------
101 Scrub 24.6% 0 SUS 00000000 00000000