Adaptec 2254100-R - SATA RAID 2410SA SGL/64 Controller, Руководство по программному обеспечению, Страница: 133 / 233

5-94
container Commands
container scrub
To scrub a redundant array, use the
container scrub
command.
A mirror set, a multilevel array of mirror sets, and a RAID-5 set are
examples of redundant arrays. For a mirror set or a multilevel array
of mirror sets, this means the command reconstructs the data on
both mirror halves (partitions), if found to be different. For RAID-5
sets, the command recalculates and replaces, if necessary, the parity
information.
Syntax
container scrub [/io_delay{=integer}] [/
no_repair{=boolean}][/wait{=boolean}] {container}
Parameters
{container}
Specifies the ID number (0 to 63) of the redundant array to
scrub.
Switches
/io_delay{=integer}
Specifies the number of milliseconds the controller waits
between the I/O operations required to scrub the redundant
array. The I/O delay value is not preserved between reboots of
the operating system. Valid values are 0 through 100.
/no_repair{=boolean}
Specifies whether the command performs the scrub operation
on the redundant array without repairing the error. If you set
this switch to
TRUE
, the command performs the scrub action
without repairing the error. If you set this switch to
FALSE
, the
command performs the scrub action and repairs any errors.