Adaptec 2254100-R - SATA RAID 2410SA SGL/64 Controller, Руководство по программному обеспечению, Страница: 120 / 233

5-81
container Commands
/wait{=boolean}
Specifies whether the command performs the array
reconfiguration operation synchronously or asynchronously. If
you set this switch to
TRUE
, the command performs the array
reconfiguration operation synchronously, which means the
command prompt does not return until the array
reconfiguration operation completes. If you set this switch to
FALSE
, the command performs the array reconfiguration
operation asynchronously, which means the command prompt
returns immediately.
Examples
Use the
container list
command to obtain information about
any existing arrays. As the following example shows, there is an
array 0 (a mirror set) and an array 1 (a volume set) on this controller:
AAC0>container list
Executing: container list
Num Total Oth Stripe Scsi Partition
Dr Label Type Size Ctr Size Usage C:ID:L Offset:Size
-- ----- ------ ------ --- ------ ------- ------ -------------
0 Mirror 15.0MB None 1:02:0 64.0KB: 15.0MB
Tigris 1:03:0 64.0KB: 15.0MB
E: 1 Volume 15.0MB NTFS 1:00:0 64.0KB: 15.0MB
The following example reconfigures a volume set to a stripe set:
AAC0>container reconfigure /partition_size=1 /stripe 1
Executing: container reconfigure /partition_size=1 /stripe=TRUE 1
As the command executes, note that the title bar of the DOS window
displays the status of the command. For example:
Stat:OK!Task:100,Func:RCF Ctr:1,State:RUN 97.2%
See page 3-10 for detailed information on the status information that
the command displays in the title bar as it executes the task.