Adaptec 2254100-R - SATA RAID 2410SA SGL/64 Controller, Руководство по программному обеспечению, Страница: 153 / 233

5-114
container Commands
Parameters
{container}
Specifies the ID number (0 to 63) of the array (mirror set or
multilevel array of mirror sets) to split into two separate
arrays.
Examples
Before splitting a mirror set or a multilevel array of mirror sets, use
the
container list
command to obtain information about any
existing arrays. As the following example shows, there is one
existing array (array 0, a mirror set) on this controller at the time the
mirror set is split:
AAC0>container list
Executing: container list
Num Total Oth Stripe Scsi Partition
Dr Label Type Size Ctr Size Usage C:ID:L Offset:Size
-- ----- ------ ------ --- ------ ------- ------ -------------
F: 0 Mirror 10.0MB NTFS 0:02:0 64.0KB: 10.0MB
0:02:0 10.0MB: 10.0MB
The following example shows how to split a mirror set:
AAC0>container split 0
Executing: container split 0
container 1 created
On UNIX systems, the message displayed after you execute the
container split
command includes the root special file
associated with the newly created split array.