Adaptec 2254100-R - SATA RAID 2410SA SGL/64 Controller, Руководство по программному обеспечению, Страница: 122 / 233

5-83
container Commands
container release_cache
To release the cache buffers associated with a specific array, use the
container release_cache
command. When a disk fails or you
remove a disk, the cache buffers associated with specific arrays
remain locked on the controller. This allows the opportunity for the
disk to come back online or gives you the opportunity to replace the
disk. In this case the arrays regain the previously locked buffers.
On the other hand, you may want to return these cache buffers to
the global buffer pool. This command allows you to disassociate the
cache buffers associated with specific arrays and release these cache
buffers to the global pool.
Syntax
container release_cache {container}
Parameters
{container}
Specifies the ID number (0 to 63) of the array on which you
want to release cache buffers.
Examples
The following example releases the cache buffers associated with
array 0:
AAC0>container release_cache 0
Executing: container release_cache 0
Related Information
container
commands:
■
container set cache
( page 5-97 )