Adaptec 2254100-R - SATA RAID 2410SA SGL/64 Controller Скачать руководство пользователя страница 129 | Manualshive

Страница: 129 / 233

Adaptec 2254100-R - SATA RAID 2410SA SGL/64 Controller Скачать руководство пользователя страница 129

5-90

container Commands

container remove global_failover

To remove one or more failover disks that were assigned to all arrays
through the

container set global_failover

command, use

the

container remove global_failover

command.

Syntax

container remove global_failover {scsi_device}
[{scsi_device}...]

Parameters

{scsi_device}

Specifies the ID for the SCSI device that you want to remove as
a failover disk for all arrays. You previously assigned this SCSI
device as a failover disk with the

container set

global_failover

command. See the

scsi_device

section

on page 3-7 for more information on how to specify the SCSI
device.

{scsi_device}...

Specifies the ID(s) for any other SCSI device(s) you want to
remove as failover disk(s) for all arrays. You previously
assigned these SCSI device(s) as failover disk(s) with the

container set global_failover

command.

Examples

Before removing one or more failover disks from all arrays, use the

container show failover

command to obtain information

about any existing failover disks assigned to arrays.

As the following example shows, there is an array 0 that has devices
(1,2,0) and (1,3,0) assigned to it.

AAC0>container show failover

Executing: container show failover

container Scsi C:ID:L

--------- ----------------------------------

GLOBAL

1:02:0

1:03:0

0

--- No Devices Assigned ---

The following example removes SCSI device 1:02:0 as an assigned
failover disk for all arrays:

«
...
127
128
129
130
131
...
»

Содержание 2254100-R - SATA RAID 2410SA SGL/64 Controller










































































































































































































































Отзывы:

Нет отзывов