Adaptec 2254100-R - SATA RAID 2410SA SGL/64 Controller, Руководство по программному обеспечению, Страница: 21 / 233

2-2
Accessing the Command Line Interface
Accessing the CLI from the MS-DOS Prompt
To access the CLI from the MS-DOS prompt, move to the directory
containing the
afacli
executable and then type
afacli
.
Note:
To access the CLI from any location, the path in the
Windows NT/Windows 2000 (basic disk only)/Windows
XP (basic disk only) Registry or System Variables must
include the directory where the CLI executable is installed.
Or, you must be in the directory where the CLI executable
resides.
See your Windows NT or MS-DOS documentation for more
information.
Accessing the CLI from the Windows Start
Button
You can execute the command line interface (CLI):
■ From the Windows XP, Windows 2000 or Windows NT Start
button
Note:
The following procedure assumes that you
accepted the default location for the software
during installation.
To access the CLI from the Windows XP (basic disk only),
Windows 2000(basic disk only) or Windows NT Start button:
1
Click the Start button and move the mouse cursor to
Programs . Click on Programs .
2
Move the mouse cursor to SMBE . The Adaptec program
group will display.
3
Move the mouse cursor to the CLI icon. Click on CLI .