Adaptec 2254100-R - SATA RAID 2410SA SGL/64 Controller, Руководство по программному обеспечению, Страница: 179 / 233

6-20
controller Commands
controller set array_verify
To enable or disable the array verify operation, use the
controller
set verify
command. This command allows you to enable or
disable the array verify operation for all arrays controlled by the
specified controller.
Syntax
controller set array_verify
[/verify_enabled{=boolean}]
/verify_enabled{=boolean}
Specifies whether to turn on or off the array verify feature on
the specified controller. You must set this switch to
TRUE
if you
want to turn on array verify for all arrays associated with the
specified controller.
To turn off the array verify feature on the specified controller,
set this switch to
FALSE
. The command defaults to
TRUE
,
which means the command turns on the array verify feature on
the specified controller.
Examples
Before turning the array verify feature on or off, check its status by
using the
controller show array_verify
command. The
following example shows that the controller’s array verify feature is
currently off (disabled):
AAC0> controller show array_verify
Executing: controller show array_verify
Array verify DISABLED
The following example turns on (enables) the array verify feature for
the currently opened controller:
AAC0> controller set array_verify /verify_enabled
Executing: controller set array_verify /verify_enabled=TRUE