Adaptec 2254100-R - SATA RAID 2410SA SGL/64 Controller, Руководство по программному обеспечению, Страница: 225 / 233

9-8
task Commands
task resume
To resume one or all tasks previously suspended on the currently
opened controller, use the
task resume
command. You suspend
tasks with the t
ask suspend
command.
Syntax
task resume [/all{=boolean}]
[{integer}]
Parameters
{integer}
Specifies the task ID for the task to resume. Perform a
task
list /all
to display the task IDs for all tasks currently
suspended on the open controller before resuming a specific
task or all tasks.
Switches
/all{=boolean}
Specifies whether to resume all suspended tasks. If you set this
switch to
TRUE
, the command resumes all tasks that were
suspended on the currently opened controller.
If you do not specify this switch or a valid task ID, the
command displays an appropriate error message.
Examples
Before resuming a suspended task, use the
task list
command
to identify any suspended tasks, as in the following example.
AAC0>task list
Executing: task list
TaskId Function Done% Array State Specific1 Specific2
------ -------- ----- --------- ----- --------- ---------
101 Scrub 24.6% 0 SUS 00000000 00000000
The following example shows the use of the
task resume
command to resume task 101, which was previously stopped with
the
task suspend
command:
AAC0>task resume 101
Executing: task resume 101