Adaptec 2254100-R - SATA RAID 2410SA SGL/64 Controller, Руководство по программному обеспечению, Страница: 222 / 233

9-5
task Commands
The Done% Column
The Done% column displays a running percentage value that
indicates the progress of the currently running task. The display
shows the percentage in tenths of a percent increments. The
currently running task is complete when the
Done % column
displays 100% .
The Array Column
The Array column displays the ID number of the array associated
with the task (if any). In the example, the array’s ID is 0 (zero).
The State Column
The State Column displays the state of the task. Table 9-2 describes
the state values that the
task list
command can display.
Verify A verify with no repair of bad blocks task is running on the
specified SCSI disk. When the verify with no repair of bad
blocks task completes, the specified SCSI disk’s blocks were
verified without repairing any detected defects. The verify
with no repair of bad blocks task runs as a result of using
the
disk verify
command without specifying the
/repair switch.
Or, a verify with repair of bad blocks task is running on the
specified SCSI disk. When the verify with repair of bad
blocks task completes, the specified SCSI disk’s blocks were
verified and any detected bad blocks were repaired. The
verify with repair of bad blocks task runs as a result of
using the
disk verify command with the /repair
switch
.
Zero A clear disk task is running on the specified SCSI disk.
When the clear disk task completes, the specified SCSI disk
is cleared (that is, all data is erased and cannot be
recovered). The clear disk task runs as a result of using the
disk zero command.
Table 9-1. Task Types (Continued)
Task Type Meaning