Adaptec 2254100-R - SATA RAID 2410SA SGL/64 Controller, Руководство по программному обеспечению, Страница: 159 / 233

5-120
container Commands
The following example shows how to unmirror a mirror set from the
mirror set that resides on SCSI device (0,3,0):
AAC0>container unmirror 0
Executing: container unmirror 0
Note that the example eliminates some items in the
container
list
display so that you can see an example of the State column.
The following list describes the changes to the display as a result of
using the
container unmirror
command:
■
The Type column displays Volume , which indicates that the
mirror set was created from a Volume set.
■
The State column displays a blank space instead of Normal.
The Normal state is displayed only for mirror sets.
■
The Scsi C:ID:L column displays only one SCSI ID.
■
The Partition Offset:Size column displays only one partition
offset and size.
If a partition is dead, the “:” (colon) in the Partition Offset:Size
column changes to a “!” (exclamation point). See the
disk
remove dead_partitions
( page 7-9 )
command for
more information on dead partitions.
Related Information
container
commands:
■
container create mirror
( page 5-5 )
■
container list
( page 5-54 )
disk
commands:
■
disk remove dead_partitions
( page 7-9 )