CHAPTER 23. LIVE INSTRUMENT REFERENCE
419
The Pitch Envelope
The pitch envelope modulates the pitch of the sample over time, as well as of the Modulation
Oscillator, if it is enabled. This is a multi-stage envelope with Initial, Peak, Sustain and End
levels. The time needed to travel between the levels is determined by the Attack, Decay and
Release settings. The values of the envelope parameters can be adjusted via the sliders, or
by dragging the breakpoints in the envelope's display. Clicking on the diamonds between
the breakpoints allows you to adjust the slope of the envelope segments. Positive slope
values cause the envelope to move quickly at the beginning, then slower. Negative slope
values cause the envelope to remain at for longer, then move faster at the end. A slope of
zero is linear; the envelope will move at the same rate throughout the segment.
23.10.6
The Filter/Global Tab
The Filter/Global Tab.
The Filter
Sampler features a polyphonic lter with an optional integrated waveshaper. The
Morph
(M12 and M24) and
SVF
lter types can morph continuously from lowpass to bandpass to
highpass to notch and back to lowpass. Naturally, lter morphs can be
automated
.
Classic 24 dB lowpass, bandpass and highpass modes are also available, but these cannot
be morphed.
The lter's cutoff frequency can be modulated over time by a dedicated lter envelope,
which works similarly to the envelope in the Pitch/Osc tab.
