CHAPTER 23. LIVE INSTRUMENT REFERENCE
397
23.8.7
Glide and Spread
Operator's Pitch Section.
Operator includes a polyphonic glide function. When this function is activated, new notes
will start with the pitch of the last note played and then slide gradually to their own played
pitch. Glide can be turned on or off and adjusted with the Glide Time control in the pitch
display.
Operator also offers a special Spread parameter that creates a rich stereo chorus by using
two voices per note and panning one to the left and one to the right. The two voices are
detuned, and the amount of detuning can be adjusted with the Spread control in the pitch
section of the shell.
Tip:
Whether or not spread is applied to a particular note depends upon the setting of
the Spread parameter during the note-on event. To achieve special effects, you could, for
instance, create a sequence where Spread is 0 most of the time and turned on only for some
notes. These notes will then play in stereo, while the others will play mono.
The pitch section also contains a global Transpose knob.
23.8.8
Strategies for Saving CPU Power
If you want to save CPU power, turn off features that you do not need or reduce the number
of voices. Speci cally, turning off the lter or the LFO if they do not contribute to the sound
will save CPU power.
For the sake of saving CPU resources, you will also usually want to reduce the number
of voices to something between 6 and 12, and carefully use the Spread feature. The
