ABB CRB 1300, Руководство по эксплуатации продукта

Страница: 120 / 726

Select the safe zone and modify the attributes. See Modify a safe zone on
page 120 .
5 To add or modify a global setting, tap Add and select which supervision to
modify.
6 When the configuration is done, select Write to controller .
The safety report is presented on the screen.
Note
A SafeMove configuration must always be validated to verify that the desired
safety is achieved. If no validation is performed, or the validation is
inadequate, the configuration cannot be relied on for personal safety.
7 Save the safety report. Print out and sign this safety report.
The safety report and how to validate is described in detail in Application
manual - Functional safety and SafeMove .
8 Apply the configuration to the controller.
The controller is automatically restarted when applying the configuration.
Modify a safe zone
Use the following procedure to modify a safe zone.
1 Add a new safe zone or select an existing safe zone.
2 Tap Safe Zones to open the attributes.
3 Add, modify, or remove vertices as needed to create the desired shape of
the safe zone.
The green dot in the 3D visualization shows where the new vertex is located.
Use the arrows to change the position (index).
Tap the grey Add button to place the vertex.
xx2200000448
Continues on next page
120 Product manual - CRB 1300
3HAC083111-001 Revision: B
© Copyright 2022-2023 ABB. All rights reserved.
3 Installation and commissioning
3.7.4.1 The SafeMove configurator app on FlexPendant
Continued