ZyXEL Communications SBG5500-A, User Manual

Page: 94 / 274

Chapter 6 LAN
SBG5500 Series User’s Guide
94
6.4 The Static DHCP Screen
This table allows you to assign IP addresses on the LAN to specific individual computers based on their
MAC Addresses.
Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address is assigned
at the factory and consists of six pairs of hexadecimal characters, for example, 00:A0:C5:00:00:02.
Use this screen to change your SBG’s static DHCP settings. Click Configuration > LAN / Home Network >
Static DHCP to open the following screen.
Figure 64 Configuration > LAN / Home Network > Static DHCP
The following table describes the labels in this screen.
6.4.1 Edit Static DHCP
If you click Add in the Static DHCP screen or Edit next to a static DHCP entry, the following screen
displays.
Table 24 Network Setting > LAN > Static DHCP
LABEL DESCRIPTION
Add Click this to add a new static DHCP entry.
Edit Click Edit to configure a static DHCP entry.
Remove Click Remove to delete a static DHCP entry.
Multiple Entries Turn
On Select one or more static DHCP entry and click this to enable them.
Multiple Entries Turn
Off Select one or more static DHCP entry and click this to disable them.
# This is the index number of the DHCP entry.
Status This field displays whether the entry is active.
Click the slide button to turn on or turn off the entry.
MAC Address This field displays the MAC address of a computer on the LAN.
IP Address This field displays the IP address relative to the MAC address field listed above.