Chapter 9 Firewall
SBG5500 Series User’s Guide
157
9.11.2 Add/Edit an RADIUS Server
Click
Add
icon or select a server and click
Edit
to display the following screen. Use this screen to create
a new RADIUS entry or edit an existing one.
Figure 126
RADIUS Server: Add/Edit
The following table describes the labels in this screen.
Table 67 RADIUS Server: Add/Edit
LABEL
DESCRIPTION
General Settings
Name
Enter a descriptive name (up to 64 alphanumerical characters) for identification
purposes.
Description
Enter the description of each server, if any. You can use up to 128 printable ASCII
characters.
Server Settings
Server Address
Enter the IP address or FQDN of the RADIUS authentication server.
Authentication Port
Specify the port number on the RADIUS server to which the SBG sends
authentication requests. Enter a number between 1 and 65535.
Backup Server Address
If the RADIUS server has a backup authentication server, enter its IP address or FQDN
here.
Backup Authentication Port
Specify the port number on the RADIUS server to which the SBG sends
authentication requests. Enter a number between 1 and 65535.
Timeout
Specify the timeout period (between 1 and 300 seconds) before the SBG
disconnects from the RADIUS server. In this case, user authentication fails.
Search timeout occurs when either the user information is not in the RADIUS server or
the RADIUS server is down.
Summary of Contents for SBG5500-A
Page 12: ...12 PART I User s Guide...
Page 44: ...44 PART II Technical Reference...
