ZyXEL Communications SBG5500-A, User Manual

Page: 200 / 274

Chapter 11 Bandwidth Management
SBG5500 Series User’s Guide
200
11.4.1 Add/Edit a QoS Class
Click Add in the Classification Setup screen or the Edit icon next to a classifier to open the following
screen.
Remove To remove an existing classifier, select it and click Remove . Note that subsequent rules move
up by one when you take this action.
Multiple Entries Turn
On Select one or more classifier and click this to enable them.
Multiple Entries Turn
Off Select one or more classifier and click this to disable them.
# This field displays the order in which this classifier is applied.
Status This field displays whether the classifier is active or not. A green ON button signifies that this
classifier is active. A gray OFF button signifies that this classifier is not active.
Click the slide button to turn on or turn off the classifier.
Class Name This is the name of the classifier.
Classification
Criteria This shows criteria specified in this classifier, for example the interface from which traffic of
this class should come and the source MAC address of traffic that matches this classifier.
DSCP Mark This is the DSCP number added to traffic of this classifier.
802.1P Mark This is the IEEE 802.1p priority level assigned to traffic of this classifier.
VLAN ID Tag This is the VLAN ID number assigned to traffic of this classifier.
To Queue This is the name of the queue in which traffic of this classifier is put.
Table 87 Configuration > Bandwidth Management > Classification Setup (continued)
LABEL DESCRIPTION