ZyXEL Communications SBG5500-A, User Manual

Page: 198 / 274

Chapter 11 Bandwidth Management
SBG5500 Series User’s Guide
198
11.3.1 Adding a QoS Queue
Click Add or the select an existing queue and click Edit icon in the Queue Setup screen to configure a
queue.
Figure 145 Queue Setup: Add/Edit
The following table describes the labels in this screen.
Multiple Entries
Turn Off Select a queue and click this to disable it.
# This is the index number of the queue entry.
Status This field displays whether the queue is active or not. A green ON button signifies that this queue
is active. A gray OFF button signifies that this queue is not active.
Click the slide button to turn on or turn off the queue.
Name This shows the descriptive name of this queue.
Interface This shows the name of the SBG’s interface through which traffic in this queue passes.
Priority This shows the priority of this queue.
Weight This shows the weight of this queue.
Buffer
Management This shows the queue management algorithm used for this queue.
Queue management algorithms determine how the SBG should handle packets when it
receives too many (network congestion).
Rate Limit This shows the maximum transmission rate allowed for traffic on this queue.
Table 85 Network Setting > QoS > Queue Setup (continued)
LABEL DESCRIPTION
Table 86 Queue Setup: Add/Edit
LABEL DESCRIPTION
Enable Select to enable or disable this queue.
Name Enter the descriptive name of this queue. You can use up to 31 alphanumeric characters, it must
begin with a letter. The valid characters are [0-9][a-z] [A-Z][_-].
This field is not configurable if you are editing an existing queue.