Chapter 2 The Web Configurator
SBG5500 Series User’s Guide
23
LAN Status
LAN Status
Use this screen to view the status of all network traffic going through the
LAN ports of the SBG.
DHCP Client
Use this screen to view the status of all devices connected to the SBG. You
can also set screen refresh time to see updates on new devices.
ARP Table
Use this screen to view the ARP table. It displays the IP and MAC address
of each DHCP connection.
Multicast Status Use this screen to look at IGMP/MLD group status and traffic statistics.
LAN Setup
Use this screen to configure LAN TCP/IP settings, and other advanced
properties.
Static DHCP
Use this screen to assign specific IP addresses to individual MAC
addresses.
Additional
Subnet
Use this screen to configure IP alias and public static IP.
Wake on LAN
Use this screen to remotely wake up a hibernating device on the local
network.
VLAN /
Interface
Group
Use this screen to create a new interface group, which is a new LAN
bridge interface (subnet).
DNS Entry
Use this screen to view and configure a domain name and DNS routes on
the SBG.
DNS
Forwarder
Use this screen to view and configure domain zone forwarder on the SBG.
Routing
Routing
Status
Use this screen to view the IPv4 and IPv6 routing flow.
Policy Route
Use this screen to view and set up policy routes on the SBG.
Static Route
Use this screen to view and set up static routes on the SBG.
RIP
Use this screen to set up RIP (Routing Information Protocol) settings on the
SBG.
NAT
Port
Forwarding
Use this screen to make your local servers visible to the outside world.
Port
Triggering
Use this screen to change your SBG’s port triggering settings.
Address
Mapping
Use this screen to change your SBG’s address mapping settings.
Default
Server
Use this screen to configure a default server which receives packets from
ports that are not specified in the
Port Forwarding
screen.
ALG
Use this screen to enable or disable NAT ALG and SIP ALG.
Firewall / Security
Firewall
Overview
Use this screen to enable the firewall.
DoS
Use this screen to activate protection against Denial of Service (DoS)
attacks.
Firewall Rules
Use this screen to add and view existing firewall rules to the SBG.
Device
Service
Use this screen to manage the services (such as HTTP and SSH) in the SBG.
Zone Control
Use this screen to set the firewall’s default actions based on the direction
of travel of packets.
Table 3 Navigation Panel Summary (continued)
LINK
TAB
FUNCTION
Summary of Contents for SBG5500-A
Page 12: ...12 PART I User s Guide...
Page 44: ...44 PART II Technical Reference...
