ZyXEL Communications SBG5500-A, User Manual

Page: 88 / 274

Chapter 6 LAN
SBG5500 Series User’s Guide
88
6.3 The LAN Setup Screen
Use this screen to set the Local Area Network IP address and subnet mask of your SBG. Click
Configuration > LAN / Home Network to open the LAN Setup screen.
Figure 61 Configuration > LAN / Home Network > LAN Setup
The following table describes the labels in this screen.
IP Address This field displays the DHCP client’s IP address.
MAC Address This field displays the MAC address to which the IP address is currently assigned or for
which the IP address is reserved.
ARP Table
Click this to view IP-to-MAC address mapping(s).
# This is the ARP table entry number.
IP Address This is the learned IPv4 or IPv6 IP address of a device connected to a port.
MAC Address This is the MAC address of the device with the listed IP address.
Interface This is the interface used by the ARP entry.
Multicast Status
Click this to look at the current list of multicast groups the SBG has joined and which ports have joined it.
# This is the multicast status table entry number.
Type This is the protocol used by the interface.
Interface This field displays the name of an interface on the SBG that belongs to an IGMP
multicast group.
Multicast Group This field displays the name of the IGMP multicast group to which the interface
belongs.
Host This shows the clients that are part of this multicast group.
Table 20 Configuration > LAN / Home Network > LAN Status
LABEL DESCRIPTION
Table 21 Configuration > LAN / Home Network > LAN Setup
LABEL DESCRIPTION
Edit Select an entry and click Edit to modify it.
# This field is a sequential value, and it is not associated with a specific entry.
Group Name This field shows the interface group name.
Zone Name This field shows the security zone ( LAN , WLAN , DMZ , or EXTRA ) in which the LAN
interface is included.
IPv4 / Mask This field displays the LAN IPv4 address assigned to your SBG and the subnet mask of
your network in dotted decimal notation.