Chapter 6 LAN
SBG5500 Series User’s Guide
100
Figure 71
VLAN / Interface Group: Add/Edit (Interface Group)
The following table describes the labels in this screen.
Table 30 VLAN / Interface Group > Add/Edit
LABEL
DESCRIPTION
VLAN / Interface Group
Group Name
Enter the descriptive name of the VLAN or Interface Group. You can enter up to 65
characters. You can use numbers, letters, hyphens (-) and underscores(_). Spaces
are not allowed.
Mode
VLAN
Click this check box to create a VLAN group.
Interface Group (To Bridge /
Bundle WAN Interfaces)
Click this check box to create an interface group,
802.1p
IEEE 802.1p defines up to 8 separate traffic types by inserting a tag into a MAC layer
frame that contains bits to define class of service.
Select the IEEE 802.1p priority (from 0 to 7) to add to traffic the SBG sends through
tagged member ports of this group. The greater the number, the higher the priority
level.
802.1q
Type the VLAN ID number (from 1 to 4094) for traffic through tagged member ports
of this group. A VLAN ID cannot be assigned to more than one group.
VLAN Port Membership
Summary of Contents for SBG5500-A
Page 12: ...12 PART I User s Guide...
Page 44: ...44 PART II Technical Reference...
