ZyXEL Communications SBG5500-A, User Manual

Page: 218 / 274

Chapter 13 Log / Report
SBG5500 Series User’s Guide
218
Figure 155 Configuration > Log / Report > Log Settings
The following table describes the labels in this screen.
13.3.1 Edit Log on USB Settings
The Edit Log on USB Settings screen controls the detailed settings for saving logs to a connected USB
storage device. Go to the Log Settings screen (see Section 13.3 on page 217 ), and double-click the USB
setting or select it and click Edit to open the following screen.
Table 98 Configuration > Log / Report > Log Settings
LABEL DESCRIPTION
Edit Double-click an entry or select it and click Edit to open a screen where you can modify it.
Multiple Entries Turn
On Select one or more entries and click this to enable them.
Multiple Entries Turn
Off Select one or more entries and click this to disable them.
# This field is a sequential value, and it is not associated with a specific log.
Status This field displays whether the log setting is active or not. A green ON signifies that this log
setting is active. A gray OFF signifies that this log setting is not active.
Click the slide button to turn on or turn off the entry.
Name This field displays the type of log setting entry (system log, logs stored on a USB storage device
connected to the SBG, or one of the remote servers).
Log Format This field displays the format of the log.
Internal - system log; you can view the log on the View Log tab.
VRPT/Syslog - Zyxel’s Vantage Report, syslog-compatible format.
CEF/Syslog - Common Event Format, syslog-compatible format.
Summary This field is a summary of the settings for each log.
Apply Click Apply to save your changes.
Reset Click Reset to restore your previously saved settings.