Chapter 13 Log / Report
SBG5500 Series User’s Guide
221
TLS Security
Select the check box if you want encrypted communications between the mail
server and the SBG.
Security
Select
SSL/TLS
to use Secure Sockets Layer (SSL) or Transport Layer Security (TLS).
Select
STARTTLS
to upgrade a plain text connection to a secure connection using
SSL/TLS.
Mail Subject
Type the subject line for the outgoing e-mail.
Alert Mail Subject
Type the subject line for the outgoing alert e-mail.
Send From
Type the e-mail address from which the outgoing e-mail is delivered. This address is
used in replies.
Send Log to
Type the e-mail address to which the outgoing e-mail is delivered.
Send Alerts to
Type the e-mail address to which alerts are delivered.
Sending Log
Select how often log information is e-mailed. Choices are: When Full, Hourly and
When Full
,
Hourly and When Full
,
Daily and When Full
, and
Weekly and When Full
.
Day for Sending Log
This field is available if the log is e-mailed weekly. Select the day of the week the log
is emailed.
Time for Sending Log
This field is available if the log is e-mailed weekly, daily or hourly. Select the time of
day (hours and minutes) when the log is e-mailed. Use 24-hour notation.
SMTP Authentication
Select this check box if it is necessary to provide a user name and password to the
SMTP server.
Username
This box is effective when you select the
SMTP Authentication
check box. Type the
user name to provide to the SMTP server when the log is e-mailed.
Password
This box is effective when you select the
SMTP Authentication
check box. Type the
password to provide to the SMTP server when the log is e-mailed.
Retype to Confirm
Type the password again to make sure that you have entered is correctly.
Log Consolidation
Enable
Select this to activate log consolidation. Log consolidation aggregates multiple log
messages that arrive within the specified
Log Consolidation Interval
. In the
Log
Viewer
tab, the text “[count=x]”, where x is the number of original log messages, is
appended at the end of the
Message
field, when multiple log messages were
aggregated.
Log Consolidation Interval
(seconds)
Type how often, in seconds, to consolidate log information. If the same log message
appears multiple times, it is aggregated into one log message with the text
“[count=x]”, where x is the number of original log messages, appended at the end
of the
Message
field.
Log Settings
System Log
Use the System Log drop-down list to change the log settings for all of the log
categories.
disable all logs
(red X) - do not log any information for any category for the system
log or e-mail any logs to e-mail server 1 or 2.
enable normal logs
(green check mark) - create log messages and alerts for all
categories for the system log. If e-mail server 1 or 2 also has normal logs enabled, the
SBG will e-mail logs to them.
enable normal logs and debug logs
(yellow check mark) - create log messages,
alerts, and debugging information for all categories. The SBG does not e-mail
debugging information, even if this setting is selected.
Table 100 Configuration > Log / Report > Log Settings > Edit (System and Email)
LABEL
DESCRIPTION
Summary of Contents for SBG5500-A
Page 12: ...12 PART I User s Guide...
Page 44: ...44 PART II Technical Reference...
