Chapter 20 Diagnostic
SBG5500 Series User’s Guide
245
Figure 173
Maintenance > Diagnostic > Packet Capture
The following table describes the labels in this screen.
Table 114 Maintenance > Diagnostic > Packet Capture
LABEL
DESCRIPTION
Status
This displays
USB not found
if there is no USB detected in the port.
This displays
Ready
when the USB is ready for capture.
This displays
Unmount USB
to confirm you can remove your USB drive safely.
This displays
Capturing
when the packet is in process of being captured.
This displays
Completed
when the packet capture process is finished.
Interface
Enabled interfaces appear under
Interface
. Select interfaces for which to capture
packets.
File Name
Enter the label that identifies the file. The file name format is interface name-file
suffix.pcap.
Setting
Summary of Contents for SBG5500-A
Page 12: ...12 PART I User s Guide...
Page 44: ...44 PART II Technical Reference...
