Chapter 8 Network Address Translation (NAT)
SBG5500 Series User’s Guide
125
8.2.1 Add/Edit Port Forwarding
Click
Add
in the
Port Forwarding
screen or select an existing rule and click
Edit
to open the following
screen.
Figure 96
Port Forwarding: Add/Edit
The following table describes the labels in this screen.
Ending Port
This is the last external port number that identifies a service.
LAN IP Address
This is the service’s internal IP address.
Translation Start
Port
This is the first internal port number that identifies a service.
Translation End
Port
This is the last internal port number that identifies a service.
Table 42 Configuration > NAT > Port Forwarding (continued)
LABEL
DESCRIPTION
Table 43 Port Forwarding: Add/Edit
LABEL
DESCRIPTION
Enable
Clear the check box to inactivate the rule. Select the check box to activate it.
Add Exception
to Firewall
Select this option to create an incoming filter rule in the Firewall to allow the packets.
Service Name
Enter a name to identify this rule using keyboard characters (A-Z, a-z, 1-2 and so on).
Protocol
Select the protocol supported by this virtual server. Choices are
TCP
,
UDP
, or
TCP/UDP
.
WAN Interface
Select the WAN interface through which the service is forwarded.
You must have already configured a WAN connection with NAT enabled.
From WAN Site
Summary of Contents for SBG5500-A
Page 12: ...12 PART I User s Guide...
Page 44: ...44 PART II Technical Reference...
