Chapter 9 Firewall
SBG5500 Series User’s Guide
146
9.5.1 Edit a Device Service
Double click a
Service
or select one and click
Edit
to open the following screen.
Figure 114
Device Service: Edit
The following table describes the labels in this screen.
9.5.2 Add/Edit a Trust Domain
Use this screen to configure a public IP address which is allowed to access the SBG. Double click an
IP
Address
or select one and click
Edit
to open the following screen.
Apply
Click
Apply
to save your changes.
Reset
Click
Reset
to restore your previously saved settings.
Table 55 Configuration > Firewall / Security > Device Service
LABEL
DESCRIPTION
Table 56 Device Service: Edit
LABEL
DESCRIPTION
Service
This is the service you may use to access the SBG.
Port
You may change the server port number for a service if needed, however you must use the
same port number in order to use that service for remote management.
Trust Domain
Click the check box if the services is allowed access to the SBG from the trust domain.
LAN Interface
Click the check box if the services are allowed access to the SBG from the LAN.
WAN Interface
Click the check box if the services are allowed access to the SBG from all WAN connections,
or specify the interfaces individually.
OK
Click
OK
to save your changes.
Cancel
Click
Cancel
to exit this screen without saving.
Summary of Contents for SBG5500-A
Page 12: ...12 PART I User s Guide...
Page 44: ...44 PART II Technical Reference...
