manualshive.com logo in svg

ZyXEL Communications SBG5500-A, User Manual

Share
Download
ZyXEL Communications SBG5500-A User Manual Download Page 73

 Chapter 5 WAN/Internet

SBG5500 Series User’s Guide

73

Click 

Reset

 to change the port groups to their current configuration (last-saved values).

5.6  The Multi-WAN Screen

Use the 

Multi-WAN

 screen to configure the multiple WAN load balance and failover rules to distribute 

traffic among different interfaces. This helps to increase overall network throughput and reliability. Load 
balancing divides traffic loads between multiple interfaces. This allows you to improve quality of service 
and maximize bandwidth utilization for multiple ISP links. 

You can only configure one rule for each interface. Click 

Configuration > WAN / Internet > Multi-WAN 

to 

display the following screen.

Figure 55   

Configuration > WAN / Internet > Multi-WAN

The following table describes the labels in this screen. 

Table 15   Configuration > WAN / Internet > Multi-WAN

LABEL

DESCRIPTION

Configuration

Disconnect 
Connections 
Before Falling 
Back

Select this to terminate existing connections on an interface which is set to passive mode when 
any interface set to active mode in the same trunk comes back up.

System Default

The SBG automatically adds all external interfaces into the pre-configured system default 

SYSTEM_DEFAULT_WAN_TRUNK

. You cannot delete it. 

Edit

Double-click an entry or select it and click 

Edit

 to open a screen where you can modify the 

entry’s settings.

#

This field is a sequential value, and it is not associated with any interface.

Name

This field displays the label to identify the trunk.

Algorithm

This field displays the load balancing method the trunk is set to use.

Apply

Click 

Apply

 to save your changes to the SBG.

Reset

Click 

Reset

 to return the screen to its last-saved settings.

Summary of Contents for SBG5500-A



















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands