manualshive.com logo in svg

ZyXEL Communications SBG5500-A, User Manual

Share
Download
ZyXEL Communications SBG5500-A User Manual Download Page 77

 Chapter 5 WAN/Internet

SBG5500 Series User’s Guide

77

Figure 57   

Configuration > WAN / Internet > Dynamic DNS

The following table describes the labels in this screen.

5.7.1  Edit Dynamic DNS

Click 

Add 

or select an existing dynamic DNS and click 

Edit

 in the 

Dynamic DNS

 screen to configure it. 

Table 17   Configuration > WAN / Internet > Dynamic DNS

LABEL

DESCRIPTION

Dynamic DNS

Add

Click this to add a dynamic DNS. 

Edit

Select an entry and click 

Edit

 to modify the dynamic DNS’s settings.

Remove

To remove an Dynamic DNS, select it and click 

Remove

. 

Multiple Entries Turn On

Select one or more dynamic DNS entries and click this

 

to enable them.

Multiple Entries Turn Off

Select one or more dynamic DNS entries and click this

 

to disable them.

#

This is the number of an individual dynamic DNS.

Status

This field displays whether the dynamic DNS is active or not. A green 

ON

 button 

signifies that this dynamic DNS is active. A gray 

OFF

 button signifies that this dynamic 

DNS is not active.

Profile Name

This field displays the descriptive profile name for this entry.

DDNS Server

This shows your Dynamic DNS service provider.

Domain Name

This shows the domain name assigned to your SBG by your Dynamic DNS provider.

Interface

This field displays the interface to use for updating the IP address mapped to the 
domain name.

Current IP

This shows the IP address your Dynamic DNS provider has currently associated with 
the Profile Name.

Result

Accept

 - displays when DDNS profile was updated to server successfully.

Not Accept 

- displays when DDNS profile is there was a problem during sync process.

Login Fail

 - displays when a DDNS profile is incorrect and it failed 

Time

This shows the last time the IP address the Dynamic DNS provider has associated with 
the profile name was updated. 

Summary of Contents for SBG5500-A



















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands